HP Officejet 4215 - الإشعارات التنظيمية

hp officejet 4200 series

١١٠

ﺔﻴﻨﻔﻟ

ﺎﻣﻮﻠﻌﳌ

١١ ﻞﺼﻔﻟ

Connection to party lines is subject to state tariffs. Contact your state’s public

utility commission, public service commission, or corporation commission for more

information.

This equipment includes automatic dialing capability. When programming and/or

making test calls to emergency numbers:

•

Remain on the line and explain to the dispatcher the reason for the call.

•

Perform such activities in the off-peak hours, such as early morning or late

evening.

Note:

This equipment is hearing aid compatible.

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person

to use a computer or other electronic device, including fax machines, to send any

message unless such message clearly contains in a margin at the top or bottom of

each transmitted page or on the first page of transmission, the date and time it is

sent and an identification of the business, other entity, or other individual sending the

message and the telephone number of the sending machine or such business, other

entity, or individual. (The telephone number provided may not be a 900 number

or any other number for which charges exceed local or long-distance transmission

charges.) In order to program this information into your fax machine, you should

complete the steps described in the software.

FCC statement

The United States Federal Communications Commission (in 47 CFR 15.105) has

specified that the following notice be brought to the attention of users of this product.
Declaration of Conformity: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation

is subject to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Class B limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy, and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

•

Reorient the receiving antenna.

•

Increase the separation between the equipment and the receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

For more information, contact the Product Regulations Manager, Hewlett-Packard

Company, San Diego, (858) 655-4100.
The user may find the following booklet prepared by the Federal Communications

Commission helpful: How to Identify and Resolve Radio-TV Interference Problems.

This booklet is available from the U.S. Government Printing Office, Washington DC,

20402. Stock No. 004-000-00345-4.

Caution!

Pursuant to Part 15.21 of the FCC Rules, any changes or

modifications to this equipment not expressly approved by the Hewlett-

Packard Company may cause harmful interference and void the FCC

authorization to operate this equipment.

ﺪﺨﺘﺴﳌ ﻞﻴﻟ

١١١

ﺔﻴﻨﻔﻟ ﺎﻣﻮﻠﻌﳌ

ﺔﻴﻨﻔﻟ

ﺎﻣﻮﻠﻌﳌ

note à l’attention des utilisateurs du réseau téléphonique Canadien/ notice to

users of the Canadian telephone network

Cet appareil est conforme aux spécifications techniques des équipements terminaux

d’Industrie Canada. Le numéro d’enregistrement atteste de la conformité de

l’appareil. L’abréviation IC qui précède le numéro d’enregistrement indique que

l’enregistrement a été effectué dans le cadre d’une Déclaration de conformité stipulant

que les spécifications techniques d’Industrie Canada ont été respectées. Néanmoins,

cette abréviation ne signifie en aucun cas que l’appareil a été validé par Industrie

Canada.Pour leur propre sécurité, les utilisateurs doivent s’assurer que les prises

électriques reliées à la terre de la source d’alimentation, des lignes téléphoniques et

du circuit métallique d’alimentation en eau sont, le cas échéant, branchées les unes

aux autres. Cette précaution est particulièrement importante dans les zones rurales.
Le numéro REN (Ringer Equivalence Number) attribué à chaque appareil terminal

fournit une indication sur le nombre maximal de terminaux qui peuvent être connectés

à une interface téléphonique. La terminaison d’une interface peut se composer de

n’importe quelle combinaison d’appareils, à condition que le total des numéros REN

ne dépasse pas 5.
Basé sur les résultats de tests FCC Partie 68, le numéro REN de ce produit est 0.2B.
This equipment meets the applicable Industry Canada Terminal Equipment Technical

Specifications. This is confirmed by the registration number. The abbreviation IC

before the registration number signifies that registration was performed based on

a Declaration of Conformity indicating that Industry Canada technical specifications

were met. It does not imply that Industry Canada approved the equipment.
Users should ensure for their own protection that the electrical ground connections of

the power utility, telephone lines and internal metallic water pipe system, if present,

are connected together. This precaution may be particularly important in rural areas.

Note:

The Ringer Equivalence Number (REN) assigned to each terminal device

provides an indication of the maximum number of terminals allowed to be

connected to a telephone interface. The termination on an interface may consist

of any combination of devices subject only to the requirement that the sum of the

Ringer Equivalence Numbers of all the devices does not exceed 5.

The REN for this product is 0.2B, based on FCC Part 68 test results.

note à l’attention des utilisateurs Canadien/notice to users in Canada

Le présent appareil numérique n‘émet pas de bruit radioélectrique dépassant

les limites applicables aux appareils numériques de la classe B prescrites

dans le Règlement sur le brouillage radioélectrique édicté par le ministère des

Communications du Canada.
This digital apparatus does not exceed the Class B limits for radio noise emissions

from the digital apparatus set out in the Radio Interference Regulations of the

Canadian Department of Communications.

hp officejet 4200 series

١١٢

ﺔﻴﻨﻔﻟ

ﺎﻣﻮﻠﻌﳌ

١١ ﻞﺼﻔﻟ

geräuschemission

LpA < 70 dB

am Arbeitsplatz

im Normalbetrieb

nach DIN 45635 T. 19

declaration of conformity (European Union)

The Declaration of Conformity in this document complies with ISO/IEC Guide 22

and EN 45014. It identifies the product, manufacturer’s name and address, and

applicable specifications recognized in the European community.

This product is designed to interwork with the analogue telephone networks in the

following countries:

Network compatibility depends on customer selected settings, which must be reset to

use the equipment on a telephone network in a country other than where the product

was purchased. Contact the vendor or Hewlett-Packard Company if additional product

support is necessary.
This equipment has been certified by the manufacturer in accordance with Directive

1999/5/EC (annex II) for Pan-European single-terminal connection to the public

switched telephone network (PSTN). However, due to differences between the

individual PSTNs provided in different countries, the approval does not, of itself,

give an unconditional assurance of successful operation on every PSTN network

termination point.
In the event of problems, you should contact your equipment supplier in the first

instance.
This equipment is designed for DTMF tone dialing and loop disconnect dialing. In the

unlikely event of problems with loop disconnect dialing, it is recommended to use this

equipment only with the DTMF tone dial setting.

notice to users in the European Economic Area

Austria

Greece

Portugal

Belgium

Ireland

Spain

Denmark

Italy

Sweden

Finland

Luxembourg

Switzerland

France

Netherlands

United Kingdom

Germany

Norway

notice to users of the German telephone network

This HP fax product is designed to connect only to the analogue public-switched

telephone network (PSTN). Please connect the TAE N telephone connector plug,

provided with the HP Officejet 4200 and 4250 Series into the wall socket (TAE 6)

code N. This HP fax product can be used as a single device and/or in combination

.(in serial connection) with other approved terminal equipment

ﺪﺨﺘﺴﳌ ﻞﻴﻟ

١١٣

ﺔﻴﻨﻔﻟ ﺎﻣﻮﻠﻌﳌ

ﺔﻴﻨﻔﻟ

ﺎﻣﻮﻠﻌﳌ

notice to users in Korea (Officejet 4255 only)