send a fax using monitor dialing
Monitor dialing allows you to dial a number from the front panel as you would
dial a regular telephone. This feature is useful when you want to use a calling
card to charge the call. You can also use it when you need to respond to tone
prompts while dialing and must pace your dialing speed.
Depending on which model you have, you can send a fax using monitor dialing
from the front panel or by using the attached handset (HP Officejet 4250 Series
only).
to send a fax using monitor dialing from the front panel
1
Load your original face down and top first in the document feeder tray.
For more information, see
load originals
on page 25.
2
Press
Start Black
or
Start Color
.
3
Once you hear the dial tone, enter the number by using the keypad on the
front panel. You can also use speed dials. For information on using speed
dials, see
send a fax using speed dials
on page 40.
4
Follow any prompts that might occur.
Your fax is sent when the receiving fax machine answers.
to send a fax using monitor dialing from the handset (hp officejet
4250 series only)
Note:
This procedure only applies to the HP Officejet 4250 Series product.
If you have an HP Officejet 4210 Series, refer to the previous section for
instructions.
1
Load your original face down and top first in the document feeder tray.
For more information, see
load originals
on page 25.
2
Pick up the attached handset.
3
Once you hear the dial tone, enter the number by using the keypad on the
front panel. You can also use speed dials. For information on using speed
dials, see
send a fax using speed dials
on page 40.
4
Follow any prompts that might occur.
5
Press
Start Black
or
Start Color
.
Your fax is sent when the receiving fax machine answers.